COMPONENT METHOD OF ANALYSIS UNIT RESULT
Aspect Visual inspection - Clear
color ASTM D1500 - Max 2.0
Density @ 15o EN ISO 3675:98 / EN ISO 12185:96 / C1:2001 Kg/m3 Min 820.0 - Max 845.0
Flash Point EN ISO 2719:2002 oC Min 62
Distillation:
- Recovered @ 150 oC
- Recovered @ 250 oC
- Recovered @ 350 oC
- Recovered @ 95%		 EN ISO 3405:2000 -
% vol
% vol
% vol
oC		 Max 2.0
Min 85.0 - Max 65.0
-
360.0
C.F.P.P. (summer) (3)
C.F.P.P. (winter) (3)		 -
EN 116:1997		 oC
oC		 Max -2
Min 50.0 Max -12
Cloud Point (summer)
Cloud Point (winter)		 -
EN 23015:1994		 oC
oC		 Report
0
ASTM D5950
Cetane Number
Cetane Index		 EN ISO 5165:1998
EN ISO 4264:1996		 no
Index		 Min 51.0
Min 46.0
Viscosity @ 40 oC EN ISO 3104:1996 mm2/s Min 2.00 - Max 4.50
1Water Content
Total Contamination		 EN ISO 12937:2000
EN ISO 12662:2002		 mg/kg
mg/kg		 Max 200
Max 15
Sulfur Content EN ISO 20884:2004 mg/kg Max 10.0
Copper Strip Corrosion (3 hr at 50 oC) EN ISO 2160:1998 Indice 1st Class
Carbon Residue(on 10% distillation residue) EN ISO 10370:1995 % weight Max 0.15
Total Acidity
Ash Content
Lubricity, Correct Wear Scar
Oxidation Stability		 ASTM D974:2002
EN ISO 6245:2002
EN ISO 12156-1:2000
EN ISO12205:1996		 mgKHO/g
% weight
µm
g/m3		 Max 0.3
Max 0.01
Max 460
Min 20
Electrical Conductivity(4) IP 274; ASTM 2624; ISO 6297 pS/m Min 50
Poluciclic Aromatic Hydrocarbons EN 12916:2001 %m/m Max 11.0(6)
Biodiesel Content (5) EN 14078:2003 % vol Min 4.5 - Max 7.0
ITEM UNIT RESULT METHOD
DENSITY( 150C) Kg/L 0.88 ASTM D4052-16
CARBON RESIDUE %(m/m) 0 ASTM D 4530
SULPHUR CONTENT % ≤0.04 ASTM D 4294-10
ASH CONTENT %( mass) ≤0.05 ASTM D 482
POUR POINT 0C ≤-2.5 ASTM D97-12
CETANE INDEX - 46 ASTM D4737
COLOR - ≤1.5 ASTM D 1500-12
FLASH POINT 0C 73.5 AASTM D 93-15
WATER CONTENT % 0 ASTM D4006
VISCOSITY (400C) mm2/C ≤4 ASTM D445-15
MOISTURE CONTENT Wt./ppm/C ≤200 ASTM D6304
XYLENE %(Volume Fraction) ≤1 ASTM D 5580-13
BENZENE %(Volume Fraction) ≤0.1 -
TOLUENE %(Volume Fraction) ≤1 -
CHROMA ASTM COLOR 1 ASTM D 1500-10
NAPTHALENE %(MASS FRACTION) 1.1 ASTM D 2425-04 (2009)
TOTAL AROMATICS %(MASS FRACTION) 54.4 -
PRIMARY DISTALLATE OC 167.5 ASTM D 86-12
5% DISTALLATE OC 189.9 -
10% DISTALLATE OC 220.89 -
20% DISTALLATE OC 234.2 -
30% DISTALLATE OC 245.3 -
40% DISTALLATE OC 256.3 -
COMPONENT/SUBSTANCE PERMISSIBLE/LIMIT METHOD OF ANALYSIS/MESAUREMENT
METHANE 89.39-96.64 mol% ISO6974 & GPA2261
ETHANE 1.97-5.76 mol% ISO6974 & GPA2261
PROPANE 0-0.25 mol% ISO6974 & GPA2261
N-BUTANES Max 0.1 mol% ISO6974 & GPA2261
ISO- BUTANES n/a ISO6974 & GPA2261
N-PENTANES Max 0.1 mol% ISO6974 & GPA2261
ISO- PENTANES n/a ISO6974 & GPA2261
NEOPENTANE n/a ISO6974 & GPA2261
HEXANES n/a ISO6974 & GPA2261
NITROGEN Max 0.9 mol% ISO6974 & GPA2261
CARBON DIOXIDE 0.005-0.01 mol% ISO6974 & GPA2261
OXYGEN Max 0.005 mol% ISO6974 & GPA2261
HYDROGEN SULPHIDE Max 1 mg/m3 GPA 2261& LEAD ACETATE TAPE METHOD
TOTAL SULPHUR Max 5 mg/m3 ATSM D6667 & LEAD ACETATE TAPE METHOD
DENSITY OF SATURATED LIQUID 429.89-453.4 Kg/m3 Calculating based on SPA
HEATING VALUE 1.025-1.075 BTU/SCF Calculating based on SPA
HIGHER CALORIFIC VALUE 39-41.84 MJ/ m3 Calculating based on SPA
LOWER CALORIFIC VALUE 34.01-37.81 MJ/ m3 Calculating based on SPA
WOBBE INDEX 52.8-55 MJ/ m3 Calculating based on SPA
WATER DEW POINT ( ORDINARY PRESSURE) -100- -77OC Capacitance method and mirror method
HYDROCARBON DUE POINT ( ORDINARY PRESSURE) -103- -78OC Capacitance method and mirror method
Nitrogen: 46% by weight minimum
Fisher: 0.3% Max. Dryer
Biuret : 1,0% max. by weight
Anti-Caking Agent: Treated against Anti-Caking
Free ammonia : 160 PXT PPM maximum
Granulation: 0,85 – 3,35 mm not less than 90 %
Melting point : 132 degrees centigrade
PH of 10 % solution : 7.5 – 10.0 units
Color : Standard White or Pure White
Critical Relative Humidty (30°C): 73 %
Quality : Free flowing, non clotted. Free from harmful substances
Physical State: Solid at 20°C, 101 KPA white granules
Specific Gravity: Solid at 20°C, - 1.335 t/m
Molecular Weight : 60.065
Physical Presentation: Spherical beads or pellets, white
Apparent density : (kg/m3) 770 – 809 kg/m
Salinity Index : 75.4
Solubility in water at 20°C : 100g/100 ml of water
Moisture % by weight. Maximum 2.5
Total N% by weight .minimum 18
Ammonical nitrogen % by weight. minimum 15.5
Available Phosphorus (asP2O5)% by weight .minimum 46.5
Water Soluble Phosphorus (asP2O5)% by weight .minimum 39.5

Particle size Minimum 90% of the material be retained of 1mm and 4 mm IS sieve

Test Results ASTM Designation No.
Total moisture ARB 23.90 % ASTM D 3302/D 3302M-12
Moisture in the analysis sample ADB 14.73 % ASTM D 3173-11
Ash Content  ADB 4.46 % ASTM D 3174-12
Volatile Matter  ADB 38.98 % ASTM D 3175-11
Fixed Carbon ADB 41.83 % BY DIFFERENCE
Total Sulphur ADB 0.24 % ASTM D 4239 Method A-12
Gross Calorific Value ADB 5818 Kcal/kg ASTM D 5865-11a
Gross Calorific Value ARB 5192 Kcal/kg ASTM D 5865-11a
HGI 44 Index Point ASTM D 409/D 409M-12
Size 0-50mm 93.65 % ASTM D 4749-12
Parameter Unit Value
Total moisture-ARB % 6.50
Inherent Moisure- ARB % 3.00
Ash Content- ARB % 10.90
Volatile Matter-ARB % 28.30
Sulphur Content-ARB % 0.99
Net Calorific Value-ARB    Kcal/Kg    6895
 
Parameter Unit Value Test Method
Total moisture-ARB % 6.7 ISO 589:2008
Ash Content- Dry Basis % 20.6 ISO 1171:2010
Volatile Matter-Dry Basis % 24.3 ISO 562:2010
Total Sulphur-Dry Basis % 0.92 ASTM D4239
Net Calorific Value-ARB    Kcal/Kg    5540 ISO 1928
PROPERTY/ UNIT SPECIFICATION TEST METHOD
Specific gravit @25/25 OC 1.01–1.05 D-70
Penetration @250C 80-100 D-5
Softening point 0C 45-52 D-36
Ductility @250C 100 MIN D-113
Loss on heating (wt)% 0.5 MAX D-6
Drop in penetration after heating % 20 MAX D-6 D-5
Flash point 0 C 230 MIN D-92
Solubility in CS2 (wt) % 99.5 max D-4
Organic matter insoluble in CS2 (wt) % 0.2 MAX D-4
Spot Test Negative *A.A.S H.O.T.102
NO PROPERTY LIMITS TEST METHOD
1 Sulfur content , mg/kg, max 500 ASTM D 2622
ASTM D5453
ASTM D4292
2 Distillation -90% ,recovered oC,max 360 ASTM D86
3 Flash Point oC ,min 55 ASTM D3828
ASTM D93
4 Viscosity at 400 C,cSt, min-max 2.0-4.5 ASTM D445
5 Water Content mg/kg,max 200 ASTM D6304
6 Micro Carbon residue, 10% m/m,max 0.3 ASTM D189
ASTM D4530
7 Pour point, oC,max +6 ASTM D97
ASTM D5950
8 Ash content % m/m,max 0.01 ASTM D482
9 Particular Contamination,mg/l ,max 10 ASTM D6217
10 Corriosion ,Copper strip,classification max (3 hoursat 500C) Type1 ASTM D130
11 Density at 150C,kg/m3min-max Lubricity,µm,max +0.01
12 Lubricity,µm,max $2.38 -0.01
13 PAH content ,%m/m,max - ASTM D5186
ASTM D6591
14 Color ASTM,max - ASTM D1500
15 Appearance Clear & Visually free from solid matter & undissolved water ASTM D4176
PARAMETER UNITY METHOD ASTM TYPICAL GUARANTEED VALUE
Volatile Matter %w/w D-6374 13 Max 9-12
Moisture %w/w D-2961 13 Max 8
Ash %w/w D-4422 0.3 Max 0.5
sulphur %w/w D-6376 0.5 Max 3
Vanadium PPM D-6376 40 Max 250
Nickle PPM D-6376 30 Max 250
Nickle PPM D-6376 30 Max 250
Sodium PPM D-6376 130 Max 250
Calcium PPM D-6376 100 Max 250
Iron PPM D-6376 130 Max 300
Silicon PPM D-6376 80 Max 300
Fixed Carbon %w/w D-6376 75.0 Max 85
Loose shot content % Visual No Content No Content
HGI - D-5003 125 Max ≥ 8
GHV Kcal/kg D-5865 7400 -
SIZIN (0-4,75mm) % D-5709 75.0 -
SIZIN (4,75-12.5mm) % D-5709 20.0 -
SIZIN (12.5-25MM) % D-5709 2.0 -
SIZIN (+25mm) % D-5709 2.0 -
Particulars NPK-10:26:26 NPK-12:32:16 Zincated-NPK 12:32:16
Moisture % by weight, maximum 1.5 1.5 1.5
Total N % by weight, minimum 10.0 12.0 12.0
Ammoniacal N % by weight, minimum 7.0 9.0 9.0
Available phosphorus (as P 2 O 5 ) % by weight 26.0 32.0 32.0
Water soluble phosphates (as P2O5) % by weight 22.5 27.5 27.5
Weight - - -
Water soluble potash (as K2O) % by weight 26.0 16.0 16.0
Zinc (as Zn) per cent by weight, minimum - - 0.5

Particle size: Minimum 90 percent of the material shall be retained between 1mm and 4 mm IS sieve

D6 Virgin Fuel
LIQUIFIED PETROLEUM GAS (LPG)
Gasoline 91/92/95/97 Octane
Base Oil SN150/300/500
Fuel Oil CST 180/280/380